Fila CR10 1L high viscosity liquid cleaner for epoxy residues

Fila CR10 1L cleaner for epoxy residues high viscosity liquid detergent for cleaning surfaces from residues, stains and streaks of epoxy grout 53001012ITA

What is it for:

• High viscosity liquid detergent for cleaning surfaces from residues, stains and rings of epoxy grout.
• Ideal for non-absorbent materials such as porcelain stoneware, glazed ceramics and glass mosaics.

Advantages:

• Thanks to its viscosity, it removes epoxy grout stains and rings from surfaces.
• Effective even in the case of consistent and seasoned residues.
• Respect the material.
• Easy to apply.
• Pleasant almond fragrance.

Ideal for:

• Porcelain stoneware
• Glazed ceramic
• Glass Mosaic
• Glazed klinker

How to use:

Dilution: from pure to 1:1 depending on the type of residue.

Application:
Shake before use. Removing cured grout residue (after the time the grout has been put into use): spread the undiluted product with a flat brush, covering all residues perfectly. Leave to act for about 30 minutes. Rub with an abrasive sponge or a spatula on the most consistent residues. For floor application it is possible to intervene with a single brush and a suitable disc. Rinse carefully. In case of stubborn residues, repeat the application leaving the product on for longer. Removal of fresh residues: wait about an hour after grouting. Dilute the product 1:1 in water. Apply and work the product with a soft pad without exerting excessive pressure. Rinse carefully. To avoid damaging fresh joints, do not leave the product to act for more than 2-3 minutes.

Attention:

Always carry out a preventive test on a small portion of the surface to test the resistance of the material and identify the optimal waiting time for cleaning. Do not use on absorbent materials. Do not use on wood. Do not use on methacrylate surfaces. On metal surfaces, first check their resistance to the product. Do not use on: absorbent materials, wood, methacrylate surfaces.